威尼斯wnsr888-威澳门尼斯23856com

IFR4000 Nav/Comm Flight Line Test Set

IFR4000 Nav/Comm Flight Line Test Set.Equips the maintenance technician with the most portable nav/comm ramp test set on the market today.
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
Generation of ARINC 596 Selective Calling Tones
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
Guided Test capability cuts down total test time
Low cost ELT option
Frequency counter provides external frequency measurement
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
Eight or more hours of operation before recharge
Automatic power shut-down
Ergonomic design
IFR4000
The IFR 4000 is a compact, lightweight and weatherproof unit designed for testing ILS, VOR, Marker Beacon and VHF/UHF communications avionics systems.
The IFR 4000, with its lightweight size (under 8 lbs.), long run time battery (8 hrs) and ergonomic design, will provide the user with the most portable navigational communications ramp test set on the market today. Cockpit and bench use testing can be easily interchanged. The menu driven functionality and guided test capability make this instrument extremely easy to use. Combine these benefits with the outstanding price and the user has an instrument that delivers total value.

Technical Specs
Applications of IFR4000
Support for ramp or bench environment via over-the-air or direct connection
Measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
Measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
Accurate measurement of HF/VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
Simulation of Localizer and Glideslope (CAT I, II and III Ground Station) Signals with variable DDM settings
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
Simulation of VOR Beacon with variable bearing
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
Signal generation of VOR, Localizer, Glideslope and Marker Beacon
Signal generation and monitoring of COMM AM/FM/SSB
LS provides simultaneous Localizer, Glideslope and Marker Beacon signals
SELCAL decoder testing
Monitoring of Emergency Locator Transmitter (ELT), Emergency Position Indicating Radio Beacons (EPIRB) and Personal Locator Beacons (PLB)
 
* Option 1 Required of IFR4000
NSN: 6625-01-516-4656 (IFR 4000)
NSN: 6625-01-559-2384 (IFR 4000AR)
NSN: 6625-01-553-1956 (IFR 4000 with ELT option installed)
Accurate measurement of 121.5/243 MHz emergency beacon transmitter frequency, output power, modulation (AM). Headphone audio output to monitor swept tone *
Accurate measurement of 406 MHz COSPAS/SARSAT emergency beacon transmitter frequency, output power. Decode and display of all location and user protocols *
Accurate measurement of HF transmitter, frequency, output power, modulation (AM and SSB USB/LSB) receiver sensitivity
Accurate measurement of VHF/UHF transmitter, frequency, output power, modulation (AM and FM and receiver sensitivity)
Generation of ARINC 596 Selective Calling Tones
Accurate measurement of VHF/UHF antenna and or feeder SWR (Standing Wave Ratio)
Simulation of Localizer and Glideslope (CAT I, II and III) signals with variable DDM settings
Swept Localizer DDM for coupled Auto Pilot testing (Simultaneous Localizer, Glideslope and Marker signals)
Simulation of Marker Beacon, Selectable Airways (Z), Outer and Middle Marker Tones
Guided Test capability cuts down total test time
Low cost ELT option
Frequency counter provides external frequency measurement
MORSE CODE provides 1-4 characters transmitted in the VOR and ILS localizer mode
Eight or more hours of operation before recharge
Automatic power shut-down
Ergonomic design

Standard Accessories of IFR4000
9140 Antenna, 75 MHz 9137 Antenna, telescoping
10238 Transit case 6081 Operation Manual (CD)
6087 Getting Started Manual
67366 AC/DC power supply
62302 Power cord, 110 V
64020 Power cord set, 220 V
62398 TNC (male) to TNC (male) coaxial cable
24140 TNC (female) shorting cap
56080 Spare fuse
24141 50 Ω load
63958 Flip cover (IFR 4000AR only)
 
Optional Accessories of IFR4000
63656 Desk top stand
62400 RS-232 cable
6083 Maintenance Manual (CD)
IFR4000 Nav/Comm Flight Line Test Set

专业选型请咨询大家工作人员

全国统一服务热线

0755-83959699
0755-83983899
0755-23964199
0755-23964599

(国内任一地区手机、座机均可拨打)

威尼斯wnsr888-威澳门尼斯23856com

变压器综合测试仪供应商哪家好,电能质量分析仪品牌推荐,多功能校验仪先容说明,Fluke功率分析仪器价格,数字压力表多少钱

收缩

银飞电子在线客服

  • 销售一部 点击这里给我发消息
  • 销售二部 点击这里给我发消息
  • 销售三部 点击这里给我发消息
  • 0755-83959699
  • 0755-83983899
  • 在线留言

威尼斯wnsr888|威澳门尼斯23856com

XML 地图 | Sitemap 地图